HD-SDI Fiber Extender, HD-SDI Video Extenders, VOS-1HD-DT/R

Home > 3G HD-SDI Video over Fiber > HD-SDI Fiber Optic Extenders > VOS-1HD-DT/R

1-Channel HD-SDI Fiber Exntenders with Duplex Data

View more full-size: IMG1 - IMG2 - IMG3

• Uncompressed HD-SDI / SD-SDI
• Support SMPTE 292M, SMPTE 259M
• Support Muti-rate 270M ~ 1.485Gbps
• Support Embedded Digital audio
• Single-mode 20km or Multi-mode 300m
• Stand-alone or Rack-mount

HD-SDI	Audio	Data	PDF Datasheets	Installation Manual
	--		VOS-1HD-DT/R Datasheet	VOS-1HD-DT/R Manual

System Design

HD-SDI Video Fiber Extender VOS-1HD-DT/R provides for the digital transmission of 1-Channel uncompressed 1.485 Gbps HD-SDI (SMPTE 292) or 270 Mbps SD-SDI (SMPTE 259M) 1080P HD video over fiber, support 1 duplex RS232/RS485 seria data, also support one loopback output for local display, and dual outputs for two displays in the remote end.

Stand-alone or rack-mount. All HD-SDI Video Fiber Exntender of VOS-1HD-DT/R come in an insert card version. The cards can be inserted into our 16-slot, 19inch 4U rack-mountable card cage (VOS-CH04-HD16).

Single-Mode or Multi-Mode, VOS-1HD-DT/R can support FC/PC or ST/PC optical connector, the transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km, Multi-mode 300m.

Features

• Extends uncompressed HD-SDI or SD-SDI video over fiber
• Supports SMPTE 292M, SMPTE 259M or DVB-ASI compliant
• Supports embedded digital audio stream
• Multimode Fiber Support for Distances up to 300m.
• Single-Mode Fiber Support for Distances up to 20 km.
• Real-Time Video Transmission for Exceptional Quality and Resolution
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications, providing OEM

Specifications

• Video
Number of Channels:	1-Channel HD-SDI or SD-SDI
Data Rate:	1.485 Gbps; 270 Mbps
Standards:	SMPTE 292M, SMPTE 259M or DVB-ASI
Max Resolution	1920 x 1080 @ 60Hz
Equalization:	Automatic up to 200m at 1.485 Gbps and 350m at 270 Mbps of Belden 1694A
Return Loss:	> 15dB to 1.485Gbps:
• Data
Data Formats:	1-Channel Duplex RS232 & RS485 Data
Data Rate:	DC to 115.2Kbps
Bit Error Rate:	10E-9
• Connectors
Video Connector:	75 Ohm BNC (Gold Center Pin)
Data Connector:	Terminal Block
Optical Connector:	FC/PC or ST/PC
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@2A
Power Adapter:	AC 100V~240V
Power Consumption:	< 5W
Stand-Alone Dimensions:	200mm × 135mm × 38mm
Card for 4U Rack Dimensions:	145mm × 170mm × 20mm
Shipping Weight:	2.5kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-1HD-DMT	VOS-1HD-DMR	Multi-mode	1310nm/1550nm	16dB	300m
VOS-1HD-DST	VOS-1HD-DSR	Single-mode	1310nm/1550nm	12dB	20km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.

Typical Configuration

Note: Due to continuous improvement, all HD-SDI Fiber Extender and HD-SDI Fiber Optic Extenders product specifications are subject to change without further notice.