1-Ch Video + 1 Duplex Data + 1 Ethernet/IP over Fiber
Video Data IP PDF Datasheets Installation Manual
Fiber Optic Receiver Fiber Optic Receiver Fiber Optic Receiver Fiber Optic ReceiverVOS-10101FDET/R Datasheet video data IP over fiber pdfVOS-10101FDET/R Manual

Fiber Optic Receiver System Design

Fiber Optic Video & Data Transmission VOS-10101FDET/R provides for the digital transmission of 1 Channel Composite Video, 1 Duplex data and 10/100M Ethernet, and the data support RS485, RS232, RS422, no audio.

Stand-alone or rack-mount
. All units of VOS-10101FDET/R come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U or 6U rack-mountable card cage (VOS-CH04 or VOS-CH06).

Single-Mode or Multi-Mode, VOS-10101FDET/R can support FC/PC or ST/PC Optical connector, can be used in Daisy-Chain system (Need to customize). The Transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km or Multi-mode 2km.


• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM

Fiber Optic Receiver Specifications

• Video
Number of Channels: 1 Channel Video
Video input/output impedance: BNC 75 Ω
Video input/output Compatibility: PAL, NTSC,SECAM
Video input/output voltage: 1.0 Volt p-p
Bandwidth: 6.5MHZ
Bit Resolution: 8-Bit Digital Transmission
Differential Gain: < 1.5%
Differential Phase: < 1.5 °
Tilt: < 5%
Signal-to-Noise Ratio(SNR): > 67 dB
• Data
Data Formats: RS485(2-wire or 4-wire),RS232,RS422,Contact Closure
Data Rate: DC to 115.2Kbps
Bit Error Rate: 10E-9
• Ethernet/IP
Standard: Ethernet IEEE 802.3 (Auto-Negotiation)
Data Rate: 10/100 Mbps
Connector: RJ-45, Auto MDI/MDI-X
• Connectors
Video: 75 Ohm BNC (Gold Center Pin)
Data: Terminal Block
Optical: FC/PC or ST/PC Optional
Stand-Alone Power: Screw terminal block
Rack Power: AC line cord
• Electrical & Mechanical
Input Power Requirements: DC 5V@2A
Power Adapter: AC 100V~240V
Power Consumption: < 3W
Stand-Alone Dimensions: 142mm × 107mm × 25mm
Card for 4U Rack Dimensions: 145mm × 170mm × 20mm
Shipping Weight: 1.8kg (include Transmitter & Receiver)
• Environmental
Operating Temperature: -40°C ~ +75°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 0% ~ 95% (non-condensing)
MTBF: >100,000 hours

Fiber Optic Video Receiver Ordering Information & Optical Specifications

Model Number Fiber Mode Wavelengths Optical Power Budget Maximum Transmission Distance
Transmitter Receiver
VOS-10101FDEMT VOS-10101FDEMR MM 1310nm/1550nm 16dB 2km
VOS-10101FDEST VOS-10101FDESR SM 1310nm/1550nm 12dB 20km
VOS-10101FDEST-4 VOS-10101FDESR-4 SM 1310nm/1550nm 18dB 40km
VOS-10101FDEST-6 VOS-10101FDESR-6 SM 1310nm/1550nm 25dB 60km

• The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm).
• When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget.
• Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
• Maximum transmission distance is also limited by fiber bandwidth.
• Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug.
• Please feel free to consult factory for any special requirement and customization.

Fiber Optic Video Receiver Typical Configuration

Fiber Optic Video Receiver

Note: Due to continuous improvement, all fiber optic transmission systems and fiber optic video receiver product specifications are subject to change without further notice.

We're here to help
Contact us for Fiber Optics

Easy way to get the answers you need.


Online Feedback
• Request a quote
• Become a Distributor

Fiber Optics for CCTV
Fiber Optics for CCTV

VOSCOM focus on security surveillance (CCTV) and fiber optic Transmission...
1-Channel Video for fixed Camera (PDF)
2-Channel Video for fixed Camera (PDF)
4-Channel Video for fixed Camera (PDF)
8-Channel Video for fixed Camera (PDF)
16-Channel Video for fixed Camera (PDF)

Become a Partner
Become a partner in fiber optics

VOSCOM invite and welcome distributors, resellers , agents or OEM customers to join us.
Learn More > >

Warranty Policy
Fiber Optics warranty

VOSCOM will repair or replace any equipment proved to be defective.
Learn More > >

Keyword Tags

Fiber Optic Transmitter - Fiber Optic Video Transmitter and Receiver - Video Optical Transmitter and Receiver - Fiber Optic Receiver - Fiber Optic Extender - Video Extender over Fiber - Fiber Optic Links - Video Links over Fiber - Fiber Optic Video Modem - Video Modem over Fiber - Fiber Optic Video Transceiver - Video Transceiver over Fiber - CCTV Fiber Optic Transmitter - CCTV Fiber Optic Extender - CCTV Fiber Optic Transceiver - CCTV Fiber Optic Multiplexer - CCTV Fiber Optic Links

Follow us on LinkedinFollow us on TwitterFollow us on Facebook