Fiber Optic Systems Designed By You - For You.
fiber Optic video & Audio ptz transmission
Video Audio Data PDF Datasheets A&E Datasheets
fiber Optic video pdfFiber Optic Video fiber Optic video A&EFiber Optic Video

Fiber Optic Systems Designed By You - For You.

VOSCOM Fiber Optic Integrated Platform series of Fiber Optic Transmission Systems are designed entirely by you. They are built to accommodate your precise video, audio and data transport needs. Almost any configuration is available, all over one fiber.
You just need give us your system design and select the exact video, audio, data, IP ethernet, contact closure, telephone...etc signals you wish to transmission, the optics and connectors you need and the most suitable housing unit. We will supply you the most suitable equipment for your systems.

Features

• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video and Audio and Data over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Multimode Fiber Support for Distances up to 2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM

Specifications

• Video
Number of Channels: 1~128 Channels Video
Video input/output impedance: BNC 75 Ω
Video input/output Compatibility: PAL, NTSC,SECAM
Video input/output voltage: 1.0 Volt p-p
Bandwidth: 6.5MHZ
Bit Resolution: 8-Bit Digital Transmission
Differential Gain: < 1.5%
Differential Phase: < 1.5 °
Tilt: < 5%
Signal-to-Noise Ratio(SNR): > 67 dB
• Audio
Number of Channels: 1~64 Channels Audio
Audio input/output Level: 6 dBm
Audio input/output impedance: 600 Ω
Bandwidth: 10Hz ~ 20KHz
Bit Resolution: 24-Bit
Signal-to-Noise Ratio(SNR): > 80 dB
• Data
Data Formats:: RS485(2-wire or 4-wire), RS232, RS422, Contact Closure
Data Rate: DC to 115.2Kbps
Bit Error Rate:: 10E-9
• Connectors
Video: 75 Ohm BNC (Gold Center Pin)
Audio: RJ-45
Data: RJ-45
Optical: FC (standard),ST Optional
Stand-Alone Power: Screw terminal block
Rack Power: AC line cord
• Electrical & Mechanical
Input Power Requirements: According to your selection
Power Adapter: AC 100V~240V,AC/DC 12V~48V Optional
Power Consumption: According to your selection
Stand-Alone Dimensions: According to your selection
Shipping Weight: According to your selection
• Environmental
Operating Temperature: -40°C ~ +75°C
Storage Temperature: -40°C ~ +85°C
Relative Humidity: 0% ~ 95% (non-condensing)
MTBF: >100,000 hours

Sample Model Configuration


Fiber Optic Video & audio & ptz Transmission

Note: Due to continuous improvement, all Fiber Optic Transmission Systems product specifications are subject to change without further notice.

We're here to help
Contact us for Fiber Optics

Easy way to get the answers you need.

E-Mail:
Sales@voscom.com
support@voscom.com
RMA@voscom.com

Online Feedback
• Request a quote
• Become a Distributor

Fiber Optics for CCTV
Fiber Optics for CCTV

VOSCOM focus on security surveillance (CCTV) and fiber optic Transmission...
• 1-Ch Video over fiber optics for fixed camera (PDF)
• 1-Ch Video & Data over fiber optics for PTZ camera (PDF)
• 4-Ch Video over fiber optics for fixed cameras (PDF)
• 4-Ch Video over fiber optics for PTZ cameras (PDF)

Become a Partner
Become a partner in fiber optics

VOSCOM invite and welcome distributors, resellers , agents or OEM customers to join us.
Learn More > >

Warranty Policy
Fiber Optics warranty

VOSCOM will repair or replace any equipment proved to be defective.
Learn More > >

Follow us on LinkedinFollow us on TwitterFollow us on Facebook