10-Bit Digitally Encoded Video & 24-Bit 8 Audio Transmission

Home > Fiber Optic Transmission Systems > Fiber Optic Distribution > VOS-4800FFT/R-10B

10-Bit 4 Video & 24-Bit 8 Audio Transmission

Video	Audio	Data	PDF Datasheets	A&E Datasheets	Installation Manual
		--	VOS-4800FFT/R	VOS-4800FFT/R	VOS-4800FFT/R

System Design

10-Bit Digitally Encoded Fiber Optic Video & Audio Transmission VOS-4800FFT/R-10B provides for the digital transmission of 4 Channels Composite 10-Bit Video and 8 simplex 24-Bit audio. Ideal for Broadcast/Studio, CCTV audio and Professional AV applications.
Stand-alone or rack-mount. All units of VOS-4800FFT/R-10B come in an insert card version.The cards can be inserted into our 14-slot, 19inch 4U rack-mountable card cage (VOS-CH04). One 4-Channel video and 8 simplex audio card require two slots widths.
Single-Mode or Multi-Mode, VOS-4800FFT/R-10B only can support FC or ST optical connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget. Manufacturer's standard is: Single-mode 20km.

Features

• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video and Audio over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Multimode Fiber Support for Distances up to 1.5 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM

Specifications

• Video
Number of Channels:	4 Channels Video
Video input/output impedance:	BNC 75 Ω
Video input/output Compatibility:	PAL, NTSC,SECAM
Video input/output voltage:	1.0 Volt p-p
Bandwidth:	6.5MHZ
Bit Resolution:	10-Bit Digital Transmission
Differential Gain:	< 1.5%
Differential Phase:	< 1.5 °
Tilt:	< 5%
Signal-to-Noise Ratio(SNR):	> 67 dB
• Audio
Number of Channels:	8 Channels Simplex Audio
Audio input/output Level:	6 dBm
Audio input/output impedance:	600 Ω Balanced/Unbalanced
Bandwidth:	10Hz ~ 20KHz
Bit Resolution:	24-Bit
Signal-to-Noise Ratio(SNR):	> 80 dB
• Connectors
Video:	75 Ohm BNC (Gold Center Pin)
Audio:	Terminal Block
Optical:	FC (standard), ST Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@3A
Power Adapter:	AC 100V~240V
Power Consumption:	< 5W
Stand-Alone Dimensions:	176.5mm × 158mm × 59mm
Card for 4U Rack Dimensions:	145mm × 170mm × 45.4mm (two slots)
Shipping Weight:	2.5kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-4800FFMT-10B	VOS-4800FFMR-10B	MM	1310nm	12dB	1.5km
VOS-4800FFST-10B	VOS-4800FFSR-10B	SM	1310nm	12dB	20km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization.

Typical Configuration

10-Bit Digitally Encoded fiber optic transmitter

Note: Due to continuous improvement, all fiber optic transmission systems and 10-Bit Digitally Encoded Video product specifications are subject to change without further notice.